H&R DR 12mm Wheel Spacer Silver for 1998-2010 Volkswagen Beetle - 24255571 - (2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998)

H&R

24255571

Continue Shopping or Checkout

Vehicle Fitment 1998-2010 Volkswagen Beetle
Spacer Type H&R DR Wheel Spacer
Bolt Pattern 5/100
Center Bore 57.1
Bolt/Stud Bolt
Thread Pitch 14x1.5
Spacer Width 12mm
Spacer Color Silver
Vehicle Notes

If the hub face of your vehicle is 150mm (most vehicles have 135mm hub face), alternative spacers are available. Please see list below.

DR = 8mm 162555719
DR = 12mm 242555713
DR = 15mm 302555716
DR = 20mm 402555716
DRA = 20mm 4025572
DRA = 25mm 50255712
DRA = 30mm 60255712
Vehicle Notes
Vehicle Notes
Vehicle Notes

TRAK+ Spacers
If you’ve ever seen a sleek, European sedan with that oh-so-low street stance and a bulging wheel / tire combo that fits perfectly in the wheel wells, chances are that car was fitted with H&R TRAK+ Wheel Spacers. TRAK+ Wheel Spacers make your existing tires and wheels appear wider by moving the wheel out from the hub, providing both performance and appearance improvements. Whether you want improved handling, increased safety or simply desire your car to make a statement about your individual style, TRAK+ Wheel Spacers can help you accomplish your goal.

Variations

  • DR Series (10 – 40 mm track widening)
    DR Series spacers fit between the wheel and hub, and require longer wheel bolts (ordered separately). Please verify bolt specifics before ordering (taper or round bolt head and shaft length). All DR-Systems require longer wheel bolts. These must be ordered separately.
  • DRSSeries (10 – 40 mm track widening)
    DRS Series spacers fit between the wheel and hub, and require exchanging the existing wheel studs for longer ones (included).
  • DRA Series (40 – 60 mm track widening)
    DRA Series spacers bolt to the hub with special wheel bolts (included) and provide new threaded holes for wheel bolts.
  • DRM Series (40 – 90 mm track widening)
    DRM Series spacers bolt to the hub with existing wheel studs and special nuts (included). Wheel is bolted to new DRM wheel studs.

Features

  • Hubcentric
  • Maximizes vehicle track width for great looks, lowered roll center, and increased lateral stability – improved handling
  • Made of a proprietary aluminum/magnesium alloy (Up to 70% lighter than a comparable steel product)
  • Hard anodized to ensure a tough, durable finish
  • Great for use in winter with snow tires and wheels

All DR-Systems require longer wheel bolts. These must be ordered separately. When ordering wheel bolts, please follow these guidelines:

a) If possible, name the brand of wheel.

b) New bolts must be longer than the original bolts by the width of the wheel spacer used.

c) The bolt head must be identical to the existing bolt:
Taper 60° End digit 01
Round head for M12/d24 mm, for M14/d28 mm End digit 02
Round head for M12/d26 mm (e.g. OE VAG-wheels) End digit 03
Flat head for Porsche original wheels M14 x 1.5 End digit 06

d) Safety guidelines
(Minimum number of turns for wheel bolts / nuts):
M12 x 1.25 = 8.0 turns = approx. 10 mm of load bearing shaft length
M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length
M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length
M14 x 1.25 = 9.0 turns = approx. 12mm of load bearing shaft length
M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length
1/2" UNF = 8.0 turns = approx. 11 mm of load bearing shaft length

e) Please ensure that the wheel bolts do not damage any part of the brake system (ABS sensors, etc.). Turn the wheel by hand and check clearance on the inside of the hub. The wheel should rotate freely. (Maximum tolerance for some vehicles is only 2mm -- i.e. Rear Axle Mercedes).

Careful attention must be paid to the vehicle hub height and inner wheel bevel measurements. Failure to follow the measurement guidelines below can result in serious damage to wheel spacers, wheels, and mounting hardware.

Vehicle System Widening
Per Side
Part Num. Maximum
Hub Height
Inner Wheel Bevel
ASTON MARTIN DR / 11 2265681CR 20.00mm N/A
ASTON MARTIN DR / 11 2265681SW 20.00mm N/A
AUDI DR / 10 2055668 13.50mm 5.0 x 45 degrees
AUDI/PORSCHE DR / 12 2455668 13.50mm 4.0 x 45 degrees
AUDI DR / 15 3055668 17.00mm 4.0 x 45 degrees
AUDI / VOLKSWAGEN DR / 8 162345712 14.00mm 7.0 x 45 degrees
AUDI / VOLKSWAGEN DR / 8 162555716 14.00mm 7.0 x 45 degrees
AUDI / VOLKSWAGEN DR / 8 1655572 14.00mm 7.0 x 45 degrees
AUDI / VOLKSWAGEN DR / 10 202345714 16.00mm 7.0 x 45 degrees
AUDI / VOLKSWAGEN DR / 10 20255571 16.00mm 7.0 x 45 degrees
AUDI / VOLKSWAGEN DR / 10 202555712A 16.00mm 7.0 x 45 degrees
AUDI / VOLKSWAGEN DR / 10 202555712B 14.00mm 5.0 x 45 degrees
AUDI / VOLKSWAGEN DR / 10 2055571A 15.50mm 6.5 x 45 degrees
AUDI / VOLKSWAGEN DR / 10 2055571B 12.00mm 4.0 x 45 degrees
AUDI / VOLKSWAGEN DR / 12 24255571 15.00mm 5.0 x 45 degrees
AUDI / VOLKSWAGEN DR / 12 2455571 15.00mm 5.0 x 45 degrees
BMW DR / 10 2075725 12.00mm 4.0 x 45 degrees
BMW DR / 10 2075726 12.00mm 4.0 x 45 degrees
BMW DR / 10 2075740 11.00mm 2.0 x 45 degrees
BMW DR / 11 2255664 11.00mm 90 degree
BMW DR / 12 2475725 12.00mm 2.0 x 45 degrees
BMW/MINI DR / 12 2475726 12.00mm 2.0 x 45 degrees
BMW DR / 12 2475740 12.00mm 2.0 x 45 degrees
BMW DR / 12 2455664 10.00mm 90 degree
BMW DR / 13 2655664 12.50mm 90 degree
BMW DR / 15 3055664 12.50mm 90 degree
CHRYSLER / DODGE DR / 10 2055665 9.00mm 90 degree
CHRYSLER / DODGE DR / 12 2455665 10.00mm 90 degree
FORD DRS / 10 20346331 11.00mm 2.0 x 45 degrees
FORD DRS / 10 20356331 11.00mm 2.0 x 45 degrees
HONDA DRS / 10 2065640 11.00mm 2.0 x 45 degrees
HONDA DRS / 10 2065700 11.00mm 2.0 x 45 degrees
HONDA / ACURA DRS / 10 20245616 10.00mm 2.0 x 45 degrees
HONDA / ACURA DRS / 10 2064640 11.00mm 20 x 45 degrees
MAZDA DRS / 10 20245410 11.00mm 2.0 x 45 degrees
MAZDA DRS / 10 202454101 11.00mm 2.0 x 45 degrees
MERCEDES-BENZ DR / 10 2055665 9.00mm 90 degree
MERCEDES-BENZ DR / 10 20556659 N/A N/A
MERCEDES-BENZ DR / 12 2455665 10.00mm 90 degree
MERCEDES-BENZ DR / 12 24556659 N/A N/A
MINI DR / 10 2075725 12.00mm 4.0 x 45 degrees
MINI DR / 12 2475725 12.00mm 2.0 x 45 degrees
NISSAN DRS / 10 2064662 10.00mm 2.0 x 45 degrees
NISSAN DRS / 10 2065662 10.00mm 2.0 x 45 degrees
SUZUKI DR / 10 20365601 11.00mm 2.0 x 45 degrees
TOYOTA DRS / 10 20245414 11.00mm 2.0 x 45 degrees
TOYOTA DRS / 10 2025541 10.00mm 2.0 x 45 degrees
TOYOTA DRS / 10 20656014 11.00mm 2.0 x 45 degrees
VOLVO DR / 10 2035650 11.00mm 2.0 x 45 degrees
VOLVO DR / 12 2435650 10.00mm 2.0 x 45 degrees

Category: H&R DR Wheel Spacer 12mm

Vendor: H&R





Recently Viewed Items


Related Items