H&R DRS 5mm Wheel Spacer Black for 2004-2008 Nissan Maxima - 1065662SW - (2008 2007 2006 2005 2004)

H&R

1065662SW

$ 84.96

Vehicle Fitment

2004-2008 Nissan Maxima

Spacer Type

H&R DRS Wheel Spacer

Bolt Pattern

5/114.3

Center Bore

66.2

Bolt/Stud

Stud

Thread Pitch

12x1.25

Spacer Width

5mm

Spacer Color

Black

Vehicle Notes

Depending on model, axle and year, Nissan vehicles have different diameters in the shoulder of the studs. The following list provides notes and measurements of the shoulder studs required for installation. The wheel spacers shown in the catalog will be supplied with shoulder bolts d = 14.25. If you need d = 12.85, please add a “1” at the end of the part number.

Vehicle	Model	Shoulder	Front Axle/Shoulder	Rear Axle
DRS Wheel Spacers - Nissan DRS wheel spacers / required DRS shoulder
SENTRA	B13	GA 16 + SR20 DE	large 14.25mm	large 14.25 mm
100	NX	B13 GA 16 + SR 20 DE	large 14.25 mm	large 14.25 mm
200 SX	S13	CA18 T	small 12.85 mm	small 12.85 mm
200 SX	S14	SR 20 DET	large 14.25 mm	small 12.85 mm
300 ZX	Z32	VG 30 DTT	large 14.25 mm	small 12.85 mm
MAXIMA	J30	up to 10/91	small 12.85mm	small 12.85 mm
		up to 12/94	large 14.25 mm	small 12.85 mm
		from 01/95	large 14.25 mm	large 14.25 mm
MAXIMA	A32	VQ 20 + 30DE	large 14.25 mm	large 14.25 mm

Vehicle Notes

These are hub-centric flat disc type spacers which require the factory hub to center the wheels. Please measure the vehicle hub to verify sufficient height will remain to center the wheel after spacer installation.

Vehicle Notes

TRAK+ Spacers
If you’ve ever seen a sleek, European sedan with that oh-so-low street stance and a bulging wheel / tire combo that fits perfectly in the wheel wells, chances are that car was fitted with H&R TRAK+ Wheel Spacers. TRAK+ Wheel Spacers make your existing tires and wheels appear wider by moving the wheel out from the hub, providing both performance and appearance improvements. Whether you want improved handling, increased safety or simply desire your car to make a statement about your individual style, TRAK+ Wheel Spacers can help you accomplish your goal.

Variations

DR Series (10 – 40 mm track widening)
DR Series spacers fit between the wheel and hub, and require longer wheel bolts (ordered separately). Please verify bolt specifics before ordering (taper or round bolt head and shaft length). All DR-Systems require longer wheel bolts. These must be ordered separately.

DRSSeries (10 – 40 mm track widening)
DRS Series spacers fit between the wheel and hub, and require exchanging the existing wheel studs for longer ones (included).

DRA Series (40 – 60 mm track widening)
DRA Series spacers bolt to the hub with special wheel bolts (included) and provide new threaded holes for wheel bolts.

DRM Series (40 – 90 mm track widening)
DRM Series spacers bolt to the hub with existing wheel studs and special nuts (included). Wheel is bolted to new DRM wheel studs.

Features

Hubcentric
Maximizes vehicle track width for great looks, lowered roll center, and increased lateral stability – improved handling
Made of a proprietary aluminum/magnesium alloy (Up to 70% lighter than a comparable steel product)
Hard anodized to ensure a tough, durable finish
Great for use in winter with snow tires and wheels

Category: H&R DRS Wheel Spacer 5mm

Vendor: H&R

Email