H&R DR 10mm Wheel Spacer Black for 1982-1988 BMW 535is - 2075725SW - (1988 1987 1986 1985 1984 1983 1982)

2075725SW

$ 101.96

Vehicle Fitment	1982-1988 BMW 535is
Spacer Type	H&R DR Wheel Spacer
Bolt Pattern	5/120
Center Bore	72.5
Bolt/Stud	Bolt
Thread Pitch	12x1.5
Spacer Width	10mm
Spacer Color	Black
Vehicle Notes
Vehicle Notes
Vehicle Notes
Vehicle Notes

TRAK+ Spacers
If you’ve ever seen a sleek, European sedan with that oh-so-low street stance and a bulging wheel / tire combo that fits perfectly in the wheel wells, chances are that car was fitted with H&R TRAK+ Wheel Spacers. TRAK+ Wheel Spacers make your existing tires and wheels appear wider by moving the wheel out from the hub, providing both performance and appearance improvements. Whether you want improved handling, increased safety or simply desire your car to make a statement about your individual style, TRAK+ Wheel Spacers can help you accomplish your goal.

Variations

DR Series (10 – 40 mm track widening)
DR Series spacers fit between the wheel and hub, and require longer wheel bolts (ordered separately). Please verify bolt specifics before ordering (taper or round bolt head and shaft length). All DR-Systems require longer wheel bolts. These must be ordered separately.

DRSSeries (10 – 40 mm track widening)
DRS Series spacers fit between the wheel and hub, and require exchanging the existing wheel studs for longer ones (included).

DRA Series (40 – 60 mm track widening)
DRA Series spacers bolt to the hub with special wheel bolts (included) and provide new threaded holes for wheel bolts.

DRM Series (40 – 90 mm track widening)
DRM Series spacers bolt to the hub with existing wheel studs and special nuts (included). Wheel is bolted to new DRM wheel studs.

Features

Hubcentric
Maximizes vehicle track width for great looks, lowered roll center, and increased lateral stability – improved handling
Made of a proprietary aluminum/magnesium alloy (Up to 70% lighter than a comparable steel product)
Hard anodized to ensure a tough, durable finish
Great for use in winter with snow tires and wheels

All DR-Systems require longer wheel bolts. These must be ordered separately. When ordering wheel bolts, please follow these guidelines:

a) If possible, name the brand of wheel.

b) New bolts must be longer than the original bolts by the width of the wheel spacer used.

c) The bolt head must be identical to the existing bolt:
Taper 60° End digit 01
Round head for M12/d24 mm, for M14/d28 mm End digit 02
Round head for M12/d26 mm (e.g. OE VAG-wheels) End digit 03
Flat head for Porsche original wheels M14 x 1.5 End digit 06

d) Safety guidelines
(Minimum number of turns for wheel bolts / nuts):
M12 x 1.25 = 8.0 turns = approx. 10 mm of load bearing shaft length
M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length
M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length
M14 x 1.25 = 9.0 turns = approx. 12mm of load bearing shaft length
M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length
1/2" UNF = 8.0 turns = approx. 11 mm of load bearing shaft length

e) Please ensure that the wheel bolts do not damage any part of the brake system (ABS sensors, etc.). Turn the wheel by hand and check clearance on the inside of the hub. The wheel should rotate freely. (Maximum tolerance for some vehicles is only 2mm -- i.e. Rear Axle Mercedes).

Careful attention must be paid to the vehicle hub height and inner wheel bevel measurements. Failure to follow the measurement guidelines below can result in serious damage to wheel spacers, wheels, and mounting hardware.

Vehicle	System Widening Per Side	Part Num.	Maximum Hub Height	Inner Wheel Bevel
ASTON MARTIN	DR / 11	2265681CR	20.00mm	N/A
ASTON MARTIN	DR / 11	2265681SW	20.00mm	N/A
AUDI	DR / 10	2055668	13.50mm	5.0 x 45 degrees
AUDI/PORSCHE	DR / 12	2455668	13.50mm	4.0 x 45 degrees
AUDI	DR / 15	3055668	17.00mm	4.0 x 45 degrees
AUDI / VOLKSWAGEN	DR / 8	162345712	14.00mm	7.0 x 45 degrees
AUDI / VOLKSWAGEN	DR / 8	162555716	14.00mm	7.0 x 45 degrees
AUDI / VOLKSWAGEN	DR / 8	1655572	14.00mm	7.0 x 45 degrees
AUDI / VOLKSWAGEN	DR / 10	202345714	16.00mm	7.0 x 45 degrees
AUDI / VOLKSWAGEN	DR / 10	20255571	16.00mm	7.0 x 45 degrees
AUDI / VOLKSWAGEN	DR / 10	202555712A	16.00mm	7.0 x 45 degrees
AUDI / VOLKSWAGEN	DR / 10	202555712B	14.00mm	5.0 x 45 degrees
AUDI / VOLKSWAGEN	DR / 10	2055571A	15.50mm	6.5 x 45 degrees
AUDI / VOLKSWAGEN	DR / 10	2055571B	12.00mm	4.0 x 45 degrees
AUDI / VOLKSWAGEN	DR / 12	24255571	15.00mm	5.0 x 45 degrees
AUDI / VOLKSWAGEN	DR / 12	2455571	15.00mm	5.0 x 45 degrees
BMW	DR / 10	2075725	12.00mm	4.0 x 45 degrees
BMW	DR / 10	2075726	12.00mm	4.0 x 45 degrees
BMW	DR / 10	2075740	11.00mm	2.0 x 45 degrees
BMW	DR / 11	2255664	11.00mm	90 degree
BMW	DR / 12	2475725	12.00mm	2.0 x 45 degrees
BMW/MINI	DR / 12	2475726	12.00mm	2.0 x 45 degrees
BMW	DR / 12	2475740	12.00mm	2.0 x 45 degrees
BMW	DR / 12	2455664	10.00mm	90 degree
BMW	DR / 13	2655664	12.50mm	90 degree
BMW	DR / 15	3055664	12.50mm	90 degree
CHRYSLER / DODGE	DR / 10	2055665	9.00mm	90 degree
CHRYSLER / DODGE	DR / 12	2455665	10.00mm	90 degree
FORD	DRS / 10	20346331	11.00mm	2.0 x 45 degrees
FORD	DRS / 10	20356331	11.00mm	2.0 x 45 degrees
HONDA	DRS / 10	2065640	11.00mm	2.0 x 45 degrees
HONDA	DRS / 10	2065700	11.00mm	2.0 x 45 degrees
HONDA / ACURA	DRS / 10	20245616	10.00mm	2.0 x 45 degrees
HONDA / ACURA	DRS / 10	2064640	11.00mm	20 x 45 degrees
MAZDA	DRS / 10	20245410	11.00mm	2.0 x 45 degrees
MAZDA	DRS / 10	202454101	11.00mm	2.0 x 45 degrees
MERCEDES-BENZ	DR / 10	2055665	9.00mm	90 degree
MERCEDES-BENZ	DR / 10	20556659	N/A	N/A
MERCEDES-BENZ	DR / 12	2455665	10.00mm	90 degree
MERCEDES-BENZ	DR / 12	24556659	N/A	N/A
MINI	DR / 10	2075725	12.00mm	4.0 x 45 degrees
MINI	DR / 12	2475725	12.00mm	2.0 x 45 degrees
NISSAN	DRS / 10	2064662	10.00mm	2.0 x 45 degrees
NISSAN	DRS / 10	2065662	10.00mm	2.0 x 45 degrees
SUZUKI	DR / 10	20365601	11.00mm	2.0 x 45 degrees
TOYOTA	DRS / 10	20245414	11.00mm	2.0 x 45 degrees
TOYOTA	DRS / 10	2025541	10.00mm	2.0 x 45 degrees
TOYOTA	DRS / 10	20656014	11.00mm	2.0 x 45 degrees
VOLVO	DR / 10	2035650	11.00mm	2.0 x 45 degrees
VOLVO	DR / 12	2435650	10.00mm	2.0 x 45 degrees