Megan Racing Rear Camber Control Arm Kit 2003-2009 Nissan 350Z - MRS-NS-0310 - (2009 2008 2007 2006 2005 2004 2003)

The 350Z is the next generation of the Fair lady, the Z33, and is Nissan s current dominating force in motor sports. With it s Naturally Aspirated 3.5L Quad-Cam V6 (VQ35DE) that boasts torque from Low-Mid Range to Red line the 350Z is an extremely well-adapted force in competition. In it s stock configuration it is capable of so much but is still watered-down from it s full potential due to the conservative restraints of Consumer marketing and comfort.

The 350Z is a heavy-machine weighing over 3,200lbs and is plagued by body roll and a soft spring-rate for the comfort of the masses. For this reason Megan Racing has decided to develop numerous products to enhance the performance and bring out the full potential of the 350Z/G35 on both the street and track.

Alignment is crucial to the handling of your vehicle. Remembering that the only thing that touches the ground is your "Contact Patch" of your tires you have to make sure that your tires and wheels are doing exactly what you want. With this you must make sure you have the proper camber, caster and toe as well as make sure they are all working together and not against each other.

The 350Z/G35 is sensitive and "picky" when it comes to it s alignment characteristics. When you lower the vehicle, the toe and camber in the rear is drastically effected. We have developed Rear Camber-Toe Arms to help alleviate this issue. Allowing a wider range of adjustment and an easier way to access the adjustment points makes these arms a must for any driver who has lowered their 350Z/G35 and is looking to properly tune their machine for performance and help against premature tire-wear. These arms are constructed with Lightweight Steel-Alloy, which is able to withstand the stresses of extreme competition.

Rear upper control arms: Used to adjust static camber. The actual arc these move in is the camber curve, but keep in mind that all of the rear arms help determine this. They also help determine roll center, similar to a double wishbone setup.

-Designed for 2003+ Nissan 350Z (coupe, roadster), 02-06 ALTIMA 2.5/3.5 and Infiniti G35.

-Allows adjustment of Rear Camber.

-Wider range of adjustment than stock.

-High Strength steel construction protects against stresses of competition.

Specifications:
Minimum Arm Length (bolt-hole to bolt-hole): 11 1/8"
Maximum Arm Length (bolt-hole to bolt-hole): 12 7/8"
Inner Eye Bolt (Inner Diameter): 15/32"
Outer Bolt-Hole (Inner Diameter): 15/32"